1/4" Micro-Flow Valve - Barbed

1/4" Micro-Flow Valve - Barbed

  • 5 Pack $3.49 14VFV-5
  • 20 Pack $12.95 14VFV-20
  • 50 Pack $29.95 14VFV-50

* Required Fields


Make any mini-sprinkler or sprayer adjustable by inserting a 1/4" Micro-Flow Valve on a 1/4" line. Micro-Flow valves can also be used in place of 1/4" transfer barbs to control the water flow to individual plants. The barbed Micro-Valve can be used with 1/4" Polyethylene Micro Tubing and 1/4" Soaker Dripline. The valve will turn on or off with a simple quarter turn.

Customer Reviews

1/4” Micro-Flow Valve- Barbed
These valves allow me to be efficient with one of my most valuable resources, WATER!!!
Work really great. Can control individual lines.
1/4" barbed valve
These valves work great. Easy to install, shut off the water when needed. No complaints.
Just works
As described
very good 1/4 inch line shut
These do a great job and have good flow. Valve is a little tight to turn. Barbs go easily in the soft and hard tubing. Old valves were easier to tell visually if they are open or closed, but if you look close, you can tell.
Another great product
Love these valves - helps me to better control watering on different levels. We have bought from Dripworks for years, nothing has failed yet. They sell quality products and they are always helpful.
1/4" Micro-Flow Valve - Barbed
easy to use
performs as intended
solves to isolate a branch
Valves work as expected:
I recommend these valves. They work as expected.
micro flow valve
good quality use them in greenhouse many uses just plain handy
Not for adjusting flow
These work great as on/off valves. however, I wanted to adjust flow and they work poorly for this function. I suspect there are just two holes that align inside so you really only have a few degrees of flow adjustment.
Great pridout
1/4" Barbed valve
Works as advertised, happy with purchase. |Shipping was bit high, but what isn't these days.
Best on the Market
I use your valves as water control valves when cutting gem stones. Your valves are the best valve on the market for precise water control. DripWorks valves are the only valve I use for all my lapidary and stone sculpture tools.
1/4" Micro-Flow Valve - Barbed
They work well. The direction indicator helps in controlling the flow.
I needed less than .5 gph
I needed less than .5 gph - I am using this to spray water into a birdbath. working perfectly!
Valve review
Works fine, as expected.
Perfect solution
We have a number of flower planters across the front of the house. Unfortunately, they don't all have the same water requirements, so I get to make the adjustments. A flow valve at each drip emitter allows me to fine tune the process to exactly what I need.
1/4" Micro Flow Valve Barbed
These valves worked great. Easy to install, no leaks. They allow me to turn off individual lines in my raised beds.
Good 1/4 valve
I use one of these for each 1/4" emitter line on my raised beds. It's convenient to be able to turn off the water flow to any row if it's not used. Highly recommend :)

Write a Review

Only registered users can write reviews. Please, log in or register