This fitting has a shutoff valve which can be used to turn off an individual line of drip tape. Simply punch a hole in the mainline tubing, connect the drip tape to the tape end of the fitting and insert the barbed end into the punched hole.
To create a tight seal, be sure tape is warm and pliable before attaching the 5/8" start fittings (LSB/LSBSO) and end fittings (LSGS/LSPLUG). If leakage continues to occur, a 1/4 turn with pliers should suffice.
This fitting allows a flow of over 80 GPH at 10 PSI.
Use this fitting to shut off an individual line of drip tape. The barb on this fitting is slightly larger than the a standard 1/4" barb. Use the Yellow Handle Punch or Miracle Punch to make the appropriate sized hole for this fitting. Does not connect to 1/4" tubing.
I can install these valves and only water my vegetable. Perfect!!!
line to better regulate my watering. They’re easy to reuse and hold up well, which makes them economical!